IJOY Mercury kit – the familiar form factor
The AIO fame called Orion, which was released by Lost Vape, haunts many manufacturers. Therefore, they adopted a similar form factor and now offer their own vision of this issue. In my memory, this is the fourth such project.
IJOY Mercury kit
Dimensions: 78.4 x 40 x 20 mm
Weight: unknown
Case material: zinc alloy + stainless steel + resin
Power: built 1100mAch
cartridge Volume: 2ml
evaporator Resistance: 1.0 / 1.2Ω
Output Power: 12W
Voltage Range: 3.15V
mode: POWER
Protection:from low / high resistance, from overheating, from short circuit, from overcharging / overdischarge
Screen / diagonal: no
Micro-USB port / charging: yes, charging current is unknown
Color: see photo below
Options
– IJOY Mercury kit
– replaceable evaporator 2pcs 1.0 / 1.2Ω (one preinstalled)
– USB cable
– user manual
– warranty card
Our hero looks pretty nice. This is a medium-sized box with slightly cut corners for better ergonomics. Of the decor, only resin – here it is more than – and the panel is colorful, and the drip type echoes it with colors.
The complete tank has the following parameters – 16.8 x 55.2mm. It is fixed with a magnetic connector, but it is not the 510th.
The tank will refuel from above, it is enough to remove the drip type and uncork the silicone plug. Capacity is perhaps standard.
Accompaniment is offered two types of replaceable evaporators. Their resistance does not vary much, but the heating elements themselves are different.
Also, developers provide for airflow adjustment.
The main body hides in its womb a medium-sized built-in battery. Unfortunately, the charging current is unknown, the connector for these purposes was placed in the very base of the control panel.
The control panel was made nicely – a large fire button, under it “jackal” LED indicators. By the way, at the very top lurked for attaching a lanyard.
Naturally, holes are provided in the housing. The first is to control the liquid level in the atomizer, the second is to take air – this is where the aforementioned ring for adjusting the evaporator blowing is located.